ALAN’s Electrosurgical Unit (Diathermy) is designed with latest miniature electronic circuit design technology. The advanced microcontroller based helps in achieving the desired tissue effects. It is small in size but Surprises on Performance.
SAFETY :
- Patient Plate Contact Quality Monitoring System
- HF leakage monitoring & Controlling system.
- Multiple Microcontroller supervision for RF power accuracy.
- Realtime tissue impedence monitor for power control
- Power up Selftest to ensure, the unit healthiness.
- Handswitch and footswitch short detection during Selftest.
- Timeout.
RELIABILITY :
- No need Voltage Stabilizer, can work in lower voltage.
- Convection Cooling system, offers better Reliability.
- Built-in line filter protects from voltage surges and bad line Conditions. Hence no need to use of spike buster.
- Works on Generator, Inverter, & UPS.
- ALAN’s proven track record for more than 10 years.
GENERAL FEATURES :
- Feather Touch Membrane keyboard for Power, Mode, and Foot switch selection etc. for easy operation of Machine.
- User Programmable 99 memory locations.
- Can Seal up to 7mm Vessels.
- 5 Different ligation levels for Faster Sealing Cycle.
- 2 Different Fast Ligation Levels for Faster Sealing Cycle.
- Faster Sealing Cycle with Less Thermal spread.
- Works with all sealing instruments, 5mm, 10mm, etc.
- Isolated Monopolar & Biopolar output.
- Simultaneous Coagulation for 2 Surgeons in Monopolar mode.
- Monopolar outputs can be activated via Hand switch and Foot switch.
- Special Endocut mode for polypectomy & Papillotomy.
- 9 levels are given in Endocut to achieve varying speed, depth and sharpness of the cut.
- Auto-Stop in Biopolar & Monopolar for optimum coagulation effect.
- Digital volume control and audio-visual indication for all outputs.
- Restoration of previous activated power settings.
- Reduced R.F. distortion due to noiseless performance.
- User Settable maximum RF activation Timeout limit.
- Multiple Microcontrollers supervision Automatic Diagnosis enables instant power responce against tissue density & impedance variation and adjust power.
- PPCM monitors Split/Non type patient plates and deactivates output power with audio-visual alarm during improper contact between patient and patient plate to eliminate the risk of site burns.
- Using ALAN’s pedal footswitch Monopolar and Biopolar can be operated without changing any settings in the machine.
- 3 Pedal Footswitch is explosion proof and water proof.
- Compatible with Wireless Footswitch.
- Well suited for Underwater (TURP), Micro, Major, Gynaec, General and all other Surgeries.
- Upgradable to Argon beam coagulation.
- Maximum output of 400 Watts.
MONOPOLAR :
Pure : Monopolar Cut mode for underwater (TURP) and general surgeries.
Low Cut : Mode specifically tailored for Laparoscopy.
Blend : Cutting with coagulation effect.
Endocut : Special mode for Polypectomy & Papillotomy.
Spray : Impulse modulated sinuous waveform for non-contact coagulation and (TURP) underwater procedures.
Fulgurate / Force : A low spray waveform suitable for non-contact coagulation on oozing surfaces and (TURP) underwater coagulation
Desiccate : Standard Coagulation Mode.
Soft : Low Voltage coagulation mode for Delicate tissue.
A-D : Monopolar Desiccate Mode with Auto Stop.
A-S : Monopolar Soft Mode with Auto Stop
BIPOLAR :
Cut / Standard : Best coagulation mode when used with graspers. Specially designed mode for bipolar scissors.
Force / Macro : Faster Biopolar Coagulation.
Micro / Precise : Pinpoint coagulation for delicate tissue with less thermal spread.
AUT : Biopolar Mode with Auto Stop.
SAS : Biopolar Micro Mode WithAuto Start And Auto Stop.
INPUT SUPPLY :
Input Supply : 230VAC +- 20% 50 Hz
Power Consumption : 750VA Max.
Loading Duty Factor : 10Sec (Active) / 30 Sec (Pause)
Input Fuse : 5A T
Output Control : Digital Display, Push Buttons in all Modes.
TRANSPORT AND STORAGE :
Ambient temperature range : -30 °C to +65 °C
Relative humidity : 0% to 90% non-condensing
Atmospheric pressure : 500 millibars to 1060 milibars
SAFETY STANDARD :
Basic Construction : Accordance with
IEC 60601 – 1,
IEC 60601 – 1 – 2 &
IEC 60601 – 2 – 2
Protection Class : 1
Unit Type : CF
All Output : Floating Output
Electrical Potential : Connecting Pin and Balancing Indicated by Symbol.
Weight : 4.2Kg
Size (in mm) : 285(W) x 150 (H) x 350(D)